How to Code in Jumbo Universal Remote Codes

Written by matthew fortuna
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Code in Jumbo Universal Remote Codes
Universal remotes can be programmed to various entertainment devices (remote image by Sonar from

The Jumbo Universal Remote, like other universal remotes, is capable of being programmed to a variety of components around your entertainment centre. Unlike other universal remotes, the Jumbo remote is equipped with a large face that allows those with bad eyes or not-so-nimble fingers to navigate the remote's buttons easily. Programming the remote with the correct component codes can be done in just minutes and the remote will be ready to use right away.

Skill level:


  1. 1

    Turn on the component that you would like to program and press and hold the "Code Search" button on the remote.

  2. 2

    Release the button once the LED light turns on and press the button on the remote for the device that you are programming.

  3. 3

    Wait for the light on the remote to blink and slowly press the "Power" button on the remote until the device responds.

  4. 4

    Press "Enter" after the device responds to save the code in the remote.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.