How to Make an Oval Placemat

Written by rebekah martin
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make an Oval Placemat
An oval place mat fits nicely on round tables. (food plate image by palms from

Place mats sit on a table underneath a plate to help protect the table from food or drink spills. They can go on top of a tablecloth or just right on the table. Place mats are an easy way to decorate a kitchen or dining room for the season or just to dress it up a bit. Most place mats you see are rectangular, but you can make oval ones as well. They fit a little better on smaller or circular tables. Oval place mats give a table a softer look because they don't have sharp corners or edges.

Skill level:

Other People Are Reading

Things you need

  • Paper
  • Cardboard
  • Scissors
  • Fabric
  • Batting
  • Pins
  • Sewing machine
  • Thread
  • Binding
  • Fabric marking pencil

Show MoreHide


  1. 1

    Cut an oval shape out of cardboard. It should be large enough for your plates and silverware to sit on, plus extend a few inches. If you don't know how to eyeball a size, cut a piece of paper the same size as a rectangle place mat. Fold the paper into fourths, then cut the loose corners on a curve. When you unfold it, you will have an oval. Trace this onto the cardboard.

  2. 2

    Lay the cardboard pattern on to the fabric you want to use for your place mats and trace around it with a fabric marking pen or pencil. Make sure to lay it on the wrong side of the fabric.

  3. 3

    Cut out as many shapes as you want for your place mats. You will need two pieces for each place mat. You can make both sides the same or make them different so that you can flip them over for a different design.

  4. 4

    Trace and cut out one piece of batting per place mat. They should be the same oval shape as the place mats.

  1. 1

    Lay the backing fabric on the table, right side down.

  2. 2

    Place a piece of batting on top, followed by a top piece of fabric.

  3. 3

    Pin the three layers together along the edges.

  4. 4

    Sew the three layers together along the edges with a 1/4- or 1/2-inch seam. Make sure to catch all three layers.

  5. 5

    Trim the seams close to the stitching.

  6. 6

    Pin the binding around the edge of the place mat and sew in place.

  7. 7

    Repeat with the other place mats.

Tips and warnings

  • Use the binding on the edges and not just a ribbon or trim. The binding will deal well with the curves.
  • You could also make a circular place mat with this same format. Simply cut a circle out of cardboard for your pattern.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.