How to Clean a Fuel Line

Written by adelaide damoah
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Clean a Fuel Line
A fuel line is usually made from reinforced rubber. (fuel valve image by Luis Bras from Fotolia.com)

A fuel line is a pipe that runs from the gas tank to the engine. Fuel lines are often made of reinforced rubber to keep them from splitting. Over time, if gas is allowed to sit in the fuel line for a prolonged period of time, the gas may break down, leading to the build-up of slimy deposits within the line. Fuel lines can also get clogged with rust and deposits from the gas tank. Cleaning the fuel line is essential to a small engine's maintenance and upkeep, such as a lawnmower.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Safety goggles
  • Protective gloves
  • Shop cloths
  • Siphon pump
  • Gas container
  • Carburettor cleaner
  • Engine fuel
  • Compressed air

Show MoreHide

Instructions

  1. 1

    Put on safety goggles, work gloves and a long-sleeved shirt. Work in an area that is well ventilated.

  2. 2

    Unscrew the gas cap and examine it. Clean off any dirt and debris with a soft cloth.

  3. 3

    Locate the fuel line on your engine. Look for a flexible tube which runs from the base of the gas tank to the carburettor.

  4. 4

    Remove the fuel line from the carburettor by either turning a screw counterclockwise or removing a clamp.

  5. 5

    Use a siphon pump to remove all of the fuel from the gas tank. Follow the manufacturer's instructions for the siphon pump and empty the fuel into a container which has been approved for this use.

  6. 6

    Remove the carburettor to clean out any accumulated slime. Remove the screws that hold the float bowl to the carburettor body. Gently pull on the float bowl to remove it from the carburettor body. Check the inside of the float bowl and clean out the carburettor bowl with carburettor cleaner if you find that slime has accumulated there.

  7. 7

    Position a dripping pan under the fuel line. Rinse out the fuel line with new engine fuel to help break down any slime that has built up from the breakdown of fuel.

  8. 8

    Turn on the air compressor. Attach a tapered end nozzle to the compressor. Clean and dry out the fuel line by blowing air through the disconnected end of the fuel line. Listen for any air entering the gas tank while you are blowing air through the fuel line. Check the inside of the gas tank for any debris that may have been blown through from the fuel line.

  9. 9

    Reattach the fuel line to the carburettor, making sure that all connections are fully fastened and secure.

  10. 10

    Fill the fuel tank with fresh fuel.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.