Audi is known for its stylish and classy vehicles, equipped with many luxury features. At times, the sunroof may open and close inadvertently by itself even when the sunroof switch is not turned on. Fixing this issue is easy and will only take 15 minutes to do, with just a couple of adjustments made to the sunroof switch. The ignition of the Audi must be turned on in order for the sunroof switch to operate properly.
- Skill level:
Other People Are Reading
Things you need
- Flat head screwdriver
- Phillips head screwdriver
- T-9 Torx screwdriver
Pry off the clear plastic light cover located near the sunroof with a screwdriver inserted at the top corner of the plastic. Add tape around the head of the screwdriver to prevent the plastic cover from getting scratched.
Pull at the top of the grey plastic sunroof switch cover located near the light cover and remove it from the Audi.
Remove both screws located at the sides of the sunroof knob with a Phillips head screwdriver, turning the screws counterclockwise. Pull out the light unit and let it hang from the wiring.
Remove the three Torx screws located on the sunroof knob with a T-9 Torx screwdriver, turning it counterclockwise. Pull off the knob cover to access a green circuit board.
Pull off the green circuit board and let it hang by the wiring, exposing two thin metal pieces raised slightly upwards.
Bend and raise the metal pieces to make them stand up more to get a better connection to the switch.
Repeat the above steps in reverse to reattach all the components that were removed. When reassembling the sunroof knob, check if the sunroof buttons click. If not, continue to adjust the thin metal pieces until the buttons click. You must do this in order for the sunroof switch to function properly.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for