How do I connect a microkorg?

Written by everett bradman
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How do I connect a microkorg?
The microKorg is much more portable than most standard-size keyboards. (keyboard image by Vasiliy Koval from

The microKorg, a 37-key synthesizer manufactured since 2002 by Korg, is known for its analogue modelling, arpeggiator, vocoder, portability and the ability to run on batteries. Connecting the microKorg to an amplifier, a computer or a MIDI instrument is straightforward and easy.

Skill level:

Other People Are Reading

Things you need

  • An instrument cable
  • A MIDI cable
  • MIDI/USB interface

Show MoreHide


  1. 1

    Connect the microKorg's "Output" jacks, both "L/Mono" and "R," to the input jacks of the mixer or powered monitor system. Use the "L/Mono" jack to make a monaural connection.

  2. 2

    Plug into the audio connections. To use the microKorg as a vocoder, connect a mic or other audio source to "Audio In 1," and use that audio source as the modulator. To use an external sequencer, rhythm machine, or audio source as the carrier of the vocoder, connect that device to "Audio In 2." Connect a mic or the output jack of the external device to both "Audio in 1" and "Audio in 2" to process the waveform of a synthesizer or sampler.

  3. 3

    Plug a MIDI cable into the microKorg's "MIDI Out" and into the chosen external MIDI tone generator's "MIDI In" to use the microKorg as a MIDI controller. Conversely, to have another MIDI keyboard or sequencer control the tone generator, use a MIDI cable to connect the microKorg's "MIDI In" and the other MIDI device's "MIDI Out."

  4. 4

    Use the "MIDI Thru" connector to control two or three external MIDI tone generators from the microKorg. Connect the MIDI cable from the "MIDI Out" of the microKorg to the "MIDI Thru" of the first tone generator, and then connect a second MIDI cable to the "MIDI In" of the second tone generator. Korg recommends using a MIDI patch bay to operate more than three tone generators.

  5. 5

    Use a MIDI cable and MIDI interface to connect an external MIDI sequencer or a computer to the microKorg. Connect the "MIDI Out" of the external MIDI sequencer/computer and the "MIDI In" of the microKorg with a MIDI cable. This will allow recorded performances to be played through the microKorg's tone generator.

Tips and warnings

  • Some USB-MIDI interface devices may not be able to transmit/receive the microKorg's MIDI exclusive messages.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.