How to Replace the Serpentine Belt of a Subaru Forester

Written by robert good
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Replace the Serpentine Belt of a Subaru Forester
(Chris Hondros/Getty Images News/Getty Images)

The serpentine belt on a Subaru Forester is located on the front of the engine. The serpentine belt is the large black belt that connects to each round engine pulley. The engine pulleys are what power the components that are on the engine, such as the alternator. Replacing the serpentine belt is not difficult to do and no major tools are needed. You can replace the serpentine belt in your driveway in 15 minutes or less.

Skill level:
Easy

Other People Are Reading

Things you need

  • Wrench
  • Replacement serpentine belt

Show MoreHide

Instructions

  1. 1

    Open the bonnet of the Subaru Forester and allow the engine to cool before proceeding. Locate the drive belt and the tension pulley. The tension pulley will be on the right front side of the engine and will be the smallest engine pulley.

  2. 2

    Connect the wrench to the nut in the centre of the engine's tension pulley. Turn the nut counterclockwise using the wrench to loosen the belt. Pull the belt off of the engine pulleys and set the belt aside.

  3. 3

    Place the new belt onto the engine pulleys. Almost every Subaru Forester engine will be set up differently, so you will need to use the drive serpentine belt diagram on the plastic cover above the radiator.

  4. 4

    Turn the wrench that is connected to the nut in the centre of the tension pulley clockwise to tighten the new belt. The tension specification will be on the diagram above the radiator.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.