How to Disable USB Power Management

Written by mike benson
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Disable USB Power Management
Disable power management to prevent potential problems with USB devices. (usb blue abstract design image by Melking from

Power Management allows Windows to disable power output to devices after a set amount of time. This process is used to save energy and is especially helpful for laptops, as it helps promote a longer battery life. While this process generally works well for monitors and internal hard drives, it can cause problems for some USB devices. It can also cause USB devices that were connected during sleep mode to not be recognised until the computer restarts.

Skill level:


  1. 1

    Press the "Windows" key and "R" key simultaneously. A "Run" box appears.

  2. 2

    Type "Devmgmt.msc," then press "Enter." This loads the Device Manager.

  3. 3

    Double-click on "Universal Serial Bus controllers."

  4. 4

    Double-click on "USB Root Hub." You may have more than one "USB Root Hub" listed in the Device Manager. Double-click on any one of the "USB Root Hubs."

  5. 5

    Click on the "Power Management" tab.

  6. 6

    Uncheck the box next to "Allow the computer to turn off this device to save power."

  7. 7

    Push the "OK" button and close the "Device Manager."

  8. 8

    Repeat steps four through seven if you would like to disable multiple "USB Root Hubs."

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.