How to Remove Lead Paint From Old Windows

Written by carson barrett
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Remove Lead Paint From Old Windows
Lead paint that is peeling is a major health risk, especially for children. (peeling paint image by Allen Penton from Fotolia.com)

A major danger for people who own older homes is contamination from lead paint. Lead is a highly toxic substance that, when ingested or absorbed into the body, can cause severe medical problems, especially for children. Any home built before 1980 is at risk for containing lead, and the older the home is, the more likely it is that there is lead paint. You can remove the lead paint yourself, but you will need to take special precautions to protect yourself, your family and the environment from lead contamination.

Skill level:
Easy

Other People Are Reading

Things you need

  • Tarp
  • 1-mm plastic sheeting
  • Duct tape
  • Water
  • Safety goggles
  • Gloves
  • Respirator
  • Liquid paint remover
  • Scraper
  • Sandpaper
  • Sander with HEPA filter
  • Heat gun
  • Plastic bags

Show MoreHide

Instructions

  1. 1

    Remove furniture away from the windows where you will be working. Cover up any large objects that cannot be moved.

  2. 2

    Turn off the heating, air conditioning and ventilation units throughout the house.

  3. 3

    Close all the vents in the room and then cover them up and seal them shut with 1-mm plastic sheeting and duct tape.

  4. 4

    Turn off the power to any outlets that are near the window if you will be wet sanding.

  5. 5

    Cover the floor around the area that you'll be working and then wash off the windows with water.

  6. 6

    Put on safety gear. This includes safety goggles, gloves and respirator. Make sure that you have no skin exposed.

  7. 7

    Scrape off the paint. There are several methods that you can use for this. You can use a liquid paint remover, applying it to the window frame (following the manufacturer's instructions) and scraping it off by hand. You can sand it off by hand or using a power sander equipped with a HEPA filter. If sanding by hand, do not sand the surface when it's dry; keep wetting it down to eliminate dust. Or you can use a low temperature heat gun to heat the paint and then strip it off by hand.

  8. 8

    Clean up all of the paint chips and wash any areas that were contaminated with lead dust. Place all paint chips and contaminated rags or cloths into double-plastic bags. Contact your state or local government to find out how to dispose of the waste.

  1. 1

    Turn off and cover all ventilation units that are in the vicinity where you will be working. Let your neighbours know what you're doing ahead of time so that they can take any precautions that they feel are necessary. Work on a day where the weather is calm to minimise the amount of dust and debris floating around.

  2. 2

    Cover the ground in the area that you'll be working with a tarp to prevent contaminating the environment.

  3. 3

    Wash the windows and frame with your hose.

  4. 4

    Take the safety precautions outlined above.

  5. 5

    Utilise the same measures as outlined previously, scraping, sanding, chemical remover and/or a heat gun.

  6. 6

    Clean up the debris and materials and dispose of them in plastic bags and according to local ordinances.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.