How to Apply Gypsum to Clay Soil

Written by kimberly johnson
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Apply Gypsum to Clay Soil
Gysum is used as a clay soil conditioner. (clay image by Pavel Korsun from

Growing plants or grass in clay soil is almost impossible because the clay does not retain the proper nutrients. In addition, the clay hardens as it dries and compresses the plant roots. One way to soften clay soil is to add gypsum to it. Gypsum is available at most home improvement stores and garden centres. It is sometimes packaged by itself or labelled as a soil conditioner. The gypsum prevents the clay from hardening back to a compacted state.

Skill level:

Other People Are Reading

Things you need

  • Cup
  • Natural gypsum powder
  • Shovel
  • Fertiliser spreader
  • Tiller
  • Leaves
  • Pine straw
  • Bark
  • Topsoil
  • Compost

Show MoreHide


  1. 1

    Take a clay soil clump that is approximately 1/4 inch in diameter, just before it rains.

  2. 2

    Set a cup outside to collect rainwater. You will need to collect at least 2 to 3 inches of water in the cup but more is fine.

  3. 3

    Insert gently the clay clump into the rain water and allow it to sit undisturbed for 24 hours.

  4. 4

    Examine the appearance of the water in the cup to see if it is cloudy and the clay has begun to disintegrate. If so, adding gypsum to the clay soil will loosen it up. If the clump does not dissolve at all, or very little, adding gypsum will have no effect on the soil.

  1. 1

    Spread a layer of gypsum over the clay soil area at a rate of 9.07 to 13.6kg. for every 100 square feet. If the soil area is small, you can use a shovel to spread the gypsum. If the area is larger, place the gypsum into a fertiliser spreader and push the spreader over the soil.

  2. 2

    Set the blade depth on a tiller to at least 4 to 5 inches. Turn the tiller on and run it completely over the clay soil area to mix the gypsum into the clay.

  3. 3

    Spread a 2- to 3-inch layer of organic mulch, such as leaves, pine straw or bark on top of the area. As the mulch breaks down it will add organic matter to the soil. You can also use top soil or compost and work it in with the tiller.

  4. 4

    Apply an additional 22.7kg. of gypsum per 1000 square feet on an annual basis thereafter.

Tips and warnings

  • Make sure to only purchase natural gypsum, not the builder's gypsum which contains cement.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.