Make decorative beads to add an individual touch to your dreads. Polymer clay is a great medium for crafting these dread beads. Forming clay around a mandrel and a wire frame provides support and makes for a stronger bead. Polymer clay is user friendly and can be fired without a special kiln. There are several brands of polymer clay, which come in a variety of colours, available at craft, art supply and bead stores.
Cut an 8-inch piece of wire with wire cutters. Wrap the wire around the mandrel. Keep the wraps even and about 3mm apart. If you want to attach smaller dangles after you fire the polymer clay, create a wire loop with round-nose pliers that extends past the end of the mandrel.
Form the clay around the wire, rotating the mandrel occasionally to keep the clay from sticking. Keep the clay the same depth throughout the entire bead to prevent weak spots. Shape the clay as desired, creating a square or cylindrical bead. Emboss or carve designs, if desired, being careful to not carve through to the wire frame.
Remove the mandrel from the bead. Fire the clay according to the manufacturer’s directions. Polymer clay fires below 149 degrees Celsius, making it possible to fire beads in a kitchen oven. Support beads on florist wire suspended across a glass or metal baking dish to keep the beads from developing a flat spot during firing.
Things you need
- Polymer clay
- Mandrel, such as a pen or pencil
- 20-gauge craft wire, approximately 8 inches
- Wire cutters
- Round-nose pliers
- Florist wire
- Glass or metal baking dish