How to Connect a Turntable to an MPC 1000

Written by greyson ferguson
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Connect a Turntable to an MPC 1000
Record samples from your record collection into the MPC 1000. (Closed-up dj turntable image by pavel Chernobrivets from Fotolia.com)

The MPC 1000 sampling production station allows you to record audio from outside sources into the sampler's built-in memory card, then upload the audio to a connected computer. It is possible to hook up just about any audio device, including a record-playing turntable. The MPC 1000 only requires two cable connections, so it takes only minutes to hook the two devices together.

Skill level:
Easy

Other People Are Reading

Things you need

  • RCA audio cable
  • RCA to 2 x 1/4-inch adaptor

Show MoreHide

Instructions

  1. 1

    Insert the red and white RCA audio cables into the respective "Audio Out" ports on the turntable.

  2. 2

    Connect the other ends of the RCA audio cable to the RCA to 2 x 1/4-inch adaptor (available at any electronics store).

  3. 3

    Plug the 1/4-inch plugs on the adaptor into the "Record In" ports on the back of the MPC 1000.

  4. 4

    Power on the turntable and the MPC 1000. You are now ready to begin streaming the audio signal from your turntable to the sampler.

Don't Miss

References

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.