How to Make a Classroom Palm Tree

Written by diana waterston
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make a Classroom Palm Tree
Classroom palm trees can teach children about recycling. (palm tree image by Christine Valin from Fotolia.com)

Three-dimensional classroom decorations add an extra dimension to making school fun. A palm tree is a great addition for a tropical theme, but also to help reinforce lessons on the rainforest, jungle, beach, trees or conservation. Make your palm tree a class project and reinforce recycling by having your students bring in used paper lunch bags for the trunk. You can decorate your finished trees with cardboard cutout animals, balloons for coconuts, or even Christmas lights.

Skill level:
Easy

Other People Are Reading

Things you need

  • Empty carpet roll tube
  • Handsaw
  • Large clay plant pot
  • 22.7kg. bag of play sand
  • Scissors
  • 80 brown lunch bags
  • Knife
  • 12 inch styrofoam block
  • 7 white metal hangers
  • 21 pieces of green tissue paper, at least 30 inches wide
  • Wire cutters
  • White glue

Show MoreHide

Instructions

  1. 1

    Get an empty carpet roll tube (free from many home improvement stores). With a handsaw, cut it to the height you desire.

  2. 2

    Stand the tube upright in the large plant pot. Fill the pot with sanitised play sand to secure the tube.

  3. 3

    Cut the closed bottoms off the lunch bags with the scissors. Slip the now circular brown paper rings over the top of the tube. Scrunch the paper bags as you stack them up from the bottom to create the texture of the trunk. Continue until you reach the top of the tube.

  4. 4

    Carve the piece of styrofoam using the knife so it fits snugly into the opening at the top of the tube. Insert it there.

  5. 5

    Snip off the hook on the wire hangers with the wire cutters. Unfold the hangers so they are straight.

  6. 6

    Lay a sheet of green tissue paper on a flat surface to make the palm fronds. Pour a line of glue down the centre of the paper. Place another sheet of tissue on top. Pour another line of glue down the centre. Press the straightened wire hanger onto the line of glue, leaving 8 inches of wire bare for the stem. Press another sheet of tissue paper over the hanger.

  7. 7

    Fold the tissue paper in half over the hanger. Set it aside to dry. Repeat with all of the hangers.

  8. 8

    Bend each hanger into an arc to make the palm frond once the glue is dry. Using the scissors, round off the square corners to make a leaf shape. Cut 1-inch strips into the tissue paper along the bottom edge.

  9. 9

    Stick the wires into the styrofoam block at the top of the tube, spacing them out so they resemble palm fronds.

Tips and warnings

  • You can also fill the clay pot with small pebbles, rocks or dirt.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.