Yamaha Acoustic Guitar String Replacement

Written by victore
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Yamaha Acoustic Guitar String Replacement
Replacing guitar strings yourself save time and money. (guitar image by April K from Fotolia.com)

Replacing the strings on an acoustic Yamaha guitar isn’t a difficult task. Actually, the project will save you money and time away from playing your guitar since you won’t need to leave it at a guitar shop. After a few easy steps, you'll have your guitar ready to play.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Replacement guitar strings
  • Side cutters

Show MoreHide

Instructions

  1. 1

    Take out the low E string. This is accomplished by unwinding the string from the tuning peg of the guitar. Turn the tuning key counterclockwise. Make sure this is done until there is slack in the string, enough to take the string carefully from the windings off the peg.

  2. 2

    Remove the piece of the string from around the tuning peg. Use side cutters. Take the string from the tailpiece, which is behind the guitar’s bridge. Glide the low E string through the section located in the tailpiece. Put it into the tuning peg’s hole. Wind the tuning peg five times.

  3. 3

    Rotate the tuning key clockwise. This causes the string to wrap about the tuning post. Tune the string to the right pitch.

  4. 4

    Duplicate all of the previous steps to replace every string. To prevent tension on the neck, make sure to replace a single string at a time.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.