How to make a fabric gun case

Written by helen jain
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to make a fabric gun case
Gun cases can protect a gun. (gun of harry image by Emmanuel Bergère from

If you're transporting a shotgun in your vehicle, the chances are that your state requires you to keep it in a case. Bulky, hard cases are fine for storing guns at home, but they can be a hassle when you're out hunting and storage is at a premium. The solution to the problem is a gun case made of soft fabric that you can easily stash when you're not using it.

Skill level:

Things you need

  • Canvas or nylon fabric
  • Velvet fabric
  • Needle or sewing machine
  • Thread
  • Scissors
  • Nylon handle or similar handle
  • Zipper
  • Gun
  • Chalk

Show MoreHide


  1. 1

    Lay the gun on the fabric. A sturdy fabric like canvas or nylon is ideal, but any fabric that doesn't show the gun through it is fine. Use the chalk to mark the dimensions of the gun on the fabric. Leave about six inches around the gun extra. Cut the outline in the canvas or nylon so that there are two pieces. Cut the outline in the velvet so that there are two pieces as well.

  2. 2

    Place the two velvet pieces on top of the two pieces of canvas or nylon. Using a needle and thread or a sewing machine, sew the velvet to the canvas so that the velvet is facing one direction and the canvas faces the other way.

  3. 3

    Put the two pieces together with the velvet facing out and the canvas facing in. Sew three sides so that one side is left open so the gun can go inside. Turn the fabric inside out so that the velvet is on the inside and the canvas or nylon is on the outside.

  4. 4

    Sew the zipper on. Be sure the zipper is on each side of the fabric and it will close the bag when it is zipped up. The size of the zipper depends on the gun's measurements.

  5. 5

    Sew the nylon handle to the bag on the same side as the zipper. It should be sewn so that when carrying the gun, the zipper will face upward and the gun won't fall out if the zipper comes undone.

  6. 6

    Put the gun inside the case and zip it up. It should fit with a little extra room. The velvet material will keep the gun from getting scratched.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.