How to Cover Up a Damaged Wood Picture Frame

Written by fred samsa
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Cover Up a Damaged Wood Picture Frame
You can repair most nicks and scratches in a wood picture frame. (wood frame image by Dumitrescu Ciprian from Fotolia.com)

A good wood picture frame can complement a painting or photograph, adding visual weight to the picture. Unfortunately, the effect is easily destroyed if you have a visible scratch or nick in your wooden picture frame. The good news is that most scratches, nicks and dings are easily covered up in just a few minutes. With the right preparation, you can restore your damaged wood picture frame well enough that only an expert will be able to tell the difference.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Felt-tip scratch remover marker
  • Padding lacquer
  • Padding lacquer solvent
  • Blending powder
  • Fine-tip artist's brush

Show MoreHide

Instructions

    Matt Finish Repair

  1. 1

    Evaluate the finish on your wooden picture frame. Stand to one side of the frame and look for a glossy sheen. If your frame is fairly matt, you may be able to repair small scratches with a felt-tip scratch remover marker, available at home furnishing and hardware stores.

  2. 2

    Repair a small scratch in a non-glossy finish with a felt-tip scratch remover marker. These markers are available in a wide variety of wood tones. Take your frame (or a colour photo of your frame) with you to the hardware store when selecting your scratch remover marker. As long as the colour is fairly close, the damage will not be noticeable after repair.

  3. 3

    Dab the tip of the scratch remover marker into the scratch, taking care not to mark the undamaged surface of the frame. Allow the marker to dry overnight. If the scratch is noticeably less glossy than the surrounding finish, use padding lacquer to complete the repair.

    Glossy Finish Repair

  1. 1

    Repair a scratch in a glossy finish with padding lacquer and blending powders, available at speciality woodworking and furniture restoration shops. Select the colour of blending powder closest to the wood colour of your frame, or mix together different tones of blending powder to create your own blend to match.

  2. 2

    Dissolve the blending powder in a small amount of padding lacquer solvent, and mix thoroughly. Add the solvent mixture to a small amount of padding lacquer, and mix thoroughly.

  3. 3

    Paint the padding lacquer mixture into the scratch with the tip of a pointed artist's brush, and allow to dry overnight. If the area appears too light, mix a darker solution of padding lacquer and reapply, and allow the reapplication to dry overnight. If the repair area is too dull, apply a thin coat of clear padding lacquer to the area and allow to dry overnight.

Tips and warnings

  • Always ensure adequate ventilation when applying lacquer finishes or using solvents.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.