How to Make a Japanese Tea Table

Written by mary jane
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make a Japanese Tea Table
A tea table is used at a variety of occasions in Japan (Tea image by crazy.nataly from

Japanese tea ceremonies can mean several things. It can be a simple social event or have a religious meaning. In any case, it emphasises aesthetics and culture. Making a Japanese tea table and using it for Japanese tea ceremonies is a great method of exploring the Japanese culture or to host a different type of social gathering. Japanese tea tables are easy to design and construct at home, if the right tools are at hand.

Skill level:

Other People Are Reading

Things you need

  • Lumber for the table legs and supportive pieces
  • 1/2-inch thick sheet of plywood 35-inches by 35-inches
  • 8 screws, 3 inch
  • 12 Screws, 2-1/4 inch
  • Mechanical screwdriver and drill
  • Screwdriver
  • Glue
  • Sandpaper
  • Saw
  • Measuring tape
  • Pencil
  • Ruler
  • Stain or paint

Show MoreHide


  1. 1

    Measure the plywood so it is 35-inches by 35-inches. The height of the wood should be at least 1/2-inch thick. However, if a thicker tabletop is desired, go ahead and purchase a thicker plywood piece. Use a pencil to make the markings and a ruler to draw straight lines. Cut out the plywood with a saw and sandpaper the edges smooth.

  2. 2

    Measure the four table legs on the lumber. Each leg should measure 14 inches in height, 2 inches in width and 2 inches in depth. Mark the measurements and cut out using the saw. Sandpaper the edges smooth.

  3. 3

    Measure the supportive pieces on the lumber. Each piece should measure 29 inches in width, 2 inches in height and 2 inches in depth. Mark the measurements and cut out the pieces with the saw. Sandpaper the edges smooth.

  4. 4

    Paint or stain all of the pieces, including the legs, supportive pieces and the tabletop. Apply several coats for a darker look. Let the pieces dry completely before continuing to assemble the tea table. Paint the tips of each screw.

  5. 5

    Place each table leg flat on a table. On each leg, measure 1/2 inch from the top. Make a mark. Turn the legs once to the left. From the top, measure 1 inch down and make a mark. Turn the legs again to the left and measure 1/2 inch from the top and make a mark. Turn the legs again and make a mark 1 inch down from the top.

  6. 6

    Drill two holes in each leg by following the marks made in the previous step. The first hole should go through the leg 1/2 inch down from the top and the other hole should be perpendicular to the first 1 inch down from the top.

  7. 7

    Take one leg and place it next to one supportive piece, so they are perpendicular to one another. The supportive piece should connect at the top of the leg piece. Use one 3-inch screw to connect the two pieces through one of the holes drilled.

  8. 8

    Connect another supportive piece to the same leg using the same method, but on the second drill hole. Once connected, the assembly should look like a V with the table leg top at the joint. Repeat this step with another table leg and the two remaining supportive pieces.

  9. 9

    Connect the ends of the V-shaped lumber constructions to each other with the two remaining table legs. Use the same method by screwing 3iinch screws in the perpendicular holes. When finishing, the tea table should be able to stand on its legs with supportive pieces to make them stable.

  10. 10

    Place the plywood flat on the floor, so the top of the table faces down towards the floor. Flip the table leg structure upside down and place it on top of the table top. Arrange the structure so it is exactly 1 inch in from each side.

  11. 11

    Trace the outline of the table leg structure on the tabletop back, including the outside and the inside of the structure. Remove it from the tabletop and apply glue in the newly traced 2-inch square line on the tabletop.

  12. 12

    Place the tableleg structure on top again, lining it up with lines drawn in the previous step. Secure the tableleg structure on the tabletop by drilling screws through the supportive pieces into the tabletop. The screws should be just long enough to secure the structure, but not come through the tabletop. When done, flip the tea table right side up and set the table for tea.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.