How to Make Lights Flash to Music

Written by mark keller
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make Lights Flash to Music
Coloured Christmas lights are one of the best types of lights for flashing. (Christmas lights image by Tomasz Wojnarowicz from Fotolia.com)

Whether you're a DJ or just a fan of Christmas with a string of lights, making light bulbs flash to the beat of your music is a fun thing to do. Believe it or not, synchronising lights and music is actually extremely easy to accomplish, and helps you add that visual pulse to the groove of the tune. With only a few simple materials and half an hour of work, you'll have a homemade music-to-light adaptor that you can plug any bulb into, creating your own audio-visual show.

Skill level:
Easy

Other People Are Reading

Things you need

  • Speakers
  • 15A relay
  • Outlet adaptor
  • Extra power cord
  • Wire
  • Soldering iron
  • Screwdriver
  • Sharp knife
  • Glue
  • Light(s)

Show MoreHide

Instructions

  1. 1

    Unscrew the casing on the primary speaker. This is the speaker to which the power cord is connected. Heat the wire connections to the actual speaker part; inside, until you can pull the speaker loose from them. Solder these two loose wires to the two left-most connections on the relay.

  2. 2

    Cut a hole in the back of the main speaker's case and run the non-plug end of your power cable through it. You may have to cut off the end and strip the wires to do this. Cut two small notches in the top of the case and stick the plug ends of the outlet adaptor through it. Secure the adaptor with glue or solder.

  3. 3

    Solder the left plug end of the adaptor to the right-most relay connection. You may need to use extra wire in between the two to connect them. Solder one of the two wires from the power cable to the right plug end, and the other power cable wire to the last connection on the relay.

  4. 4

    Unscrew and remove any speaker arts left in the case and screw the case shut again. Plug a light of your choice into the outlet adaptor. You can use a string of Christmas lights, an ordinary bulb, or even a small light inside a jack-o-lantern for a spooky effect.

  5. 5

    Plug in both the speaker's power cord and the extra power cord. Plug the speaker's audio cable into a source of music, and press play!

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.