Because asphalt is an oil-based surface, it is ill-suited for paint adhesion. If you attempt to paint your asphalt driveway with conventional paints, you soon will end up with paint failure. Fortunately, you can use a tinted sealer to alter the colour and appearance of an asphalt driveway. However, before you begin the application process, work hard to clean and prepare the surface, or you may still end up with chipping and peeling.
Things you need
Coarse plastic brush
Clear or tinted asphalt sealer
Roller extension pole
Scrub oily and greasy areas clean with a water-based degreasing agent and a coarse plastic brush.
Clean the asphalt driveway with a pressure washer. Ensure that all dust and dirt are removed from the driveway, or you may have adhesion problems. Allow the asphalt to dry.
Pour 2 gallons of clear or tinted asphalt sealer into the 5-gallon bucket. Affix the roller cover to the frame, and screw the roller to the extension pole.
Apply two coats of the asphalt sealer to the driveway, using the roller. Allow three hours of dry time between coats. Allow the sealer to cure for an entire day before walking or driving onto it.
- Never use latex or oil-based paints to coat an asphalt driveway, or you will see chipping and peeling over time. Do not apply the asphalt sealer over greasy or oily patches, or it will separate, leaving the area uncoated.
Tips and Warnings
- Never use latex or oil-based paints to coat an asphalt driveway, or you will see chipping and peeling over time.
- Do not apply the asphalt sealer over greasy or oily patches, or it will separate, leaving the area uncoated.
Things you need
- Water-based degreaser
- Coarse plastic brush
- Pressure washer
- Clear or tinted asphalt sealer
- Roller cover
- Roller frame
- Roller extension pole
- 5-gallon bucket