How to Fix Error Code 5100 on a Canon MX700

Written by ty arthur
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Fix Error Code 5100 on a Canon MX700
Fixing error codes on your Canon printer doesn't take much effort. (error digital image by UBE from Fotolia.com)

The Canon Pixma MX700 multifunction printer includes an LCD display that shows various error codes whenever a hardware or software problem occurs. Each error code is tied to a specific type of issue to make the troubleshooting process easier. Error code 5100 describes a physical problem either with a paper jam or an incorrectly seated ink tank. Resolving the error is a quick process that only requires a few standard troubleshooting procedures.

Skill level:
Moderate

Other People Are Reading

Instructions

  1. 1

    Press down and hold the "On/Off" button, which is located on the printer's operator panel, for one second. Wait 15 seconds and then tap the button again. Attempt to print or scan a document.

  2. 2

    Check the paper feed tray on the front end of the Canon MX700 to see if there is any paper visibly stuck inside the printer. Open the printer cover by gripping the front edge of the printer and lifting upwards.

  3. 3

    Grab the edge of the jammed paper and gently pull towards you to remove the paper from the paper feeder. Unplug the Canon's power cable and USB cable, and then turn the printer around.

  4. 4

    Pull off the rear plastic cover tab and check if there is any visible paper jam. Grab the edge of the paper and gently pull toward you until the paper is removed.

  5. 5

    Push the rear plastic cover tab back into place, and reconnect the power cable and USB cable. Attempt to print or scan another document to see if the error is resolved.

  6. 6

    Lift open the printer's cover again and wait for the ink carriage to slide into view. Press the "Push" button on the front of the first ink tank. Pull the tank out and then push it back into place to ensure it is properly seated.

  7. 7

    Repeat the process with the other three ink tanks, and then close the printer's cover. Power the printer off and then back on again.

Tips and warnings

  • You will need to contact Canon's customer service for a repair or replacement if error code 5100 continues to flash on the LCD display after going through the troubleshooting steps.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.