The Honeywell VR8200 is a standing pilot gas valve designed for use on a gas furnace. If your furnace is not working, the first thing you should check is your pilot light. The pilot light is located under your furnace's burner access panel, and must be manually lit. Honeywell standing pilot gas valves are designed to be user-friendly and have safety measures installed that make lighting the pilot something you can do without an expensive service call from your HVAC technician.
Set your thermostat to the lowest setting and unplug your furnace. Take the burner access panel off of your furnace. Turn your gas supply valve clockwise until it is in the "Off" position.
Wait five minutes for any gas remaining in the furnace to vent.
Turn the gas valve counterclockwise until it reads "Pilot."
Push the red "Reset" button and hold it down while you light the pilot burner with a match. Keep holding the "Reset" button for one minute after you light the pilot.
Release the "Reset" button, and turn the gas valve clockwise until it reads "On."
If the pilot does not stay lit, repeat the process beginning at step three. If after several attempts the pilot still will not stay lit, call your HVAC technician.
If you smell gas after turning the gas valve to the "Off" position, leave your house and call your gas supplier immediately. If you use liquid propane, close the valve on the main propane tank outside the house.