Audi A6 Water Sensor Location

Written by cayden conor
  • Share
  • Tweet
  • Share
  • Email

The Audi A6, depending on the year, could have a 3.0-litre or 3.2-litre engine. The water sensor or coolant temperature sensor sends a signal to the computer. The sensor works with the engine coolant sender, which sends the temperature of the engine, via voltage, to the gauge. The computer uses the signal from the sensor to turn the fans on and to adjust the air/fuel mixture.

Skill level:
Easy

Other People Are Reading

Instructions

  1. 1

    Open the bonnet.

  2. 2

    Locate the air intake pipe behind the right cylinder head, if your Audi has a 3.0-litre engine. The sensor is in the coolant pipe that is just below the air intake pipe.

  3. 3

    Locate the coolant flange just to the left of the cylinder head on the 3.2-litre engine. The coolant temperature sensor is on the coolant flange. If you are unfamiliar with them, the flange is a piece of metal with a host attached to it. The sensor is a plastic piece with wires attached to it.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.