How to install a skylight on a camper trailer with a rubber roof

Written by sara hickman
  • Share
  • Tweet
  • Share
  • Email

Fresh air and natural sunlight are two reasons to install a skylight in your camper trailer. These two elements make the unit feel larger. Skylights can be installed prior to purchase of the camper, but owners often choose to make the addition later. Keep in mind that some skylights open and some don’t. Either way, this is a day project for any do-it-yourselfer.

Skill level:

Other People Are Reading

Things you need

  • Skylight
  • Pencil
  • Saw and blade
  • Drill and bit
  • Sealant
  • Assorted wrenches
  • Assorted screwdrivers

Show MoreHide


  1. 1

    Climb safely on the roof of the camper trailer using a ladder. Find a sturdy obstacle-free location big enough for the skylight while staying eight inches from the edge of the roof. Make sure the location is free of wires and lights inside the unit.

  2. 2

    Mark off the location for the unit and drill a hole in each corner. Starting in one of the corner holes cut out the hole for the skylight.

  3. 3

    Place the top portion of the skylight into the new hole.

  4. 4

    Apply lap sealant at the point where the skykight fits into the roof. Pour the sealant where the rubber roof meets the camper's frame. Allow the sealant to "lap" and create a soft-set seal. Enter the camper trailer to complete the installation.

  5. 5

    Fit the inside portion of the skylight into the hole in the ceiling. Secure it to the outer portion using sealant and the screws that come with the skylight. Enjoy the new sunlight in your unit.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.