How to Replace a Bulb on the Instrument Panel of a Jeep Liberty

Written by chris moore
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Replace a Bulb on the Instrument Panel of a Jeep Liberty
A Jeep's interior lights can burn out along with its exterior ones. (jeep rouge 2 image by Jerome Dancette from Fotolia.com)

A number of components within the Jeep Liberty's instrument panel, like the instrument cluster and the heater/air conditioner, contain light bulbs that illuminate the units at night. Depending on how often you keep the lights on, you may need to replace one or more of the bulbs over time. You should be able to change the bulbs without completely disassembling the instrument panel.

Skill level:
Moderately Challenging

Other People Are Reading

Things you need

  • Wrench
  • Screwdriver
  • Trim stick

Show MoreHide

Instructions

  1. 1

    Disconnect the vehicle's negative battery cable--loosen the clamp nut for the black cable with a wrench and remove the cable from the terminal.

  2. 2

    Remove the trim panel bezel surrounding the component you are changing the bulb for, like the dashboard centre bezel or the instrument cluster bezel. Remove any screws with a Phillips screwdriver and pry off the panel with a trim stick.

  3. 3

    Disconnect the heater unit, instrument cluster or other component by removing its mounting screws with the screwdriver and pulling the unit out. Disconnect the electrical connectors from the unit.

  4. 4

    Turn the light bulb holder counterclockwise and pull it out of the unit to disconnect it. Pull the light bulb straight out of the socket.

  5. 5

    Push the replacement light bulb into the socket. Don't touch the glass with your bare hands, or the bulb may overheat; wearing latex gloves are one of the best ways to avoid this.

  6. 6

    Insert the bulb socket back into the cluster/unit and twist it clockwise to secure it.

  7. 7

    Install the unit back in place within the instrument panel, reconnecting its electrical connectors and securing it with its mounting screws. Push the trim panel bezel back in place and use its screws if needed.

  8. 8

    Re-connect the battery cable.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.