How to Measure the Gullet of an English Saddle

Written by keith dooley
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Measure the Gullet of an English Saddle
Width of the gullet can mean the difference in pain or no pain for a horse. (saddles and bridles image by Jeffrey Zalesny from Fotolia.com)

English saddles are built a bit differently than Western-style saddles. They are typically smaller, and as such put a little more pressure on the spine of the horse. To alleviate some of this pressure, English saddles have two padded areas that run lengthwise on either side of where the horse's spine is located. This moves the saddle off the spine and distributes the pressure to either side. The space in between the pads is the gullet.

Skill level:
Easy

Other People Are Reading

Things you need

  • Measuring tape

Show MoreHide

Instructions

  1. 1

    Flip the saddle upside down.

  2. 2

    Put a measuring tape in between the pads, or panels, underneath the saddle. This small area is the gullet.

  3. 3

    Look at the measuring tape to determine the width.

  4. 4

    Look at the gullet to see if it tapers in toward the back of the saddle. If it does, measure a second point at the back. This measurement should be paid close attention. If the pads are too close to the spine it can create painful pressure on the spine of the horse. Make sure that you can still get 3 or 4 fingers in the gullet at the back end.

Tips and warnings

  • It is best if the distance between the spine and the centre of one padded panel is about 4 inches.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.