DIY Pond Filter Media

Written by melanie l. marten
  • Share
  • Tweet
  • Share
  • Pin
  • Email
DIY Pond Filter Media
DIY filter media will filter any pond's water. (Pond image by Lucid_Exposure from

The materials inside a pond filter are what make the water in your water garden sparkling clear and healthy for plants and fish. Instead of buying expensive pond media from a garden centre or pet store, you can substitute less-expensive materials. DIY pond filter media is just as effective at mechanical and biological filtration for your pond.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Small rocks
  • Plastic wiffle golf balls
  • Hard plastic foam or pumice rocks
  • Quilt batting
  • Plastic pot scrubbers
  • Pond filter box or bucket
  • Garden hose

Show MoreHide


  1. 1

    Open the pond filter box or bucket container carefully. If this is a used filter, remove all old filter media and discard it. Clean the whole container with clear water. Do not use soaps or chemical solutions.

  2. 2

    Wash all DIY filter media with clear water before use. Do not use chemicals or soaps on any of them. Be sure the products you choose have no detergents or chemicals added. Be especially careful with sponges or pot scrubbers, as they are often impregnated with antibacterial solutions or soaps.

  3. 3

    Place several small, angular rocks at the bottom of the filter container. This will support the rest of the filter media and offer a place for beneficial bacteria to colonise. These bacteria are essential for healthy pond water. The rocks will also help stabilise the position of submersible filters in the pond.

  4. 4

    Pour a layer of plastic, Wiffle-style golf balls or bio-balls (plastic things specifically manufactured for filters), on top of the rocks. Any DIY filter media with a large surface area is ideal for more bacteria growth. Cubes of stiff plastic foam or pumice stones are other options. The open-cell design provides more surface area.

  5. 5

    Add thin, plastic pot scrubbers in an overlapping layer atop the coarse DIY pond filter media. This is the first layer of mechanical filtration to trap detritus and debris from the water garden. These are made from the same material as more expensive filter media.

  6. 6

    Roll up a length of cotton or polyester high-loft quilt batting that has not been treated with fire retardant, stain guards or other chemicals in a loose spiral. Place this on top of the other DIY filter media in the container. This material will easily filter out small pieces of debris from the water. It is relatively inexpensive and can be cleaned easily with a garden hose, or replaced as needed.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.