How to reset the range rover airbag fault code

Written by alibaster smith | 13/05/2017

The airbag assembly on your Range Rover will normally work fine for many years. It is rare that your airbag assembly will malfunction. However, when it does, you will need to have the problem fixed. Since the airbag assembly is a critical safety component, you should take this problem to a licensed mechanic who is trained to work on airbag assemblies. Once the airbag assembly is fixed, you'll need to reset the Range Rover's airbag fault code.

Open the bonnet and loosen the retaining nut on the cable clamp running to the negative battery terminal.

Slide the clamp off of the negative battery terminal.

Wait 1 minute for the Range Rover's electronic control module to cycle and reset. Then, reconnect the clamp to the negative battery terminal.

Tighten the retaining nut on the cable clamp. The airbag light should go out at this point. When it does, you'll know that the fault code has been erased.

Things you need

  • Socket wrench
  • Socket set

Show MoreHide

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.