How to use a ceramic bowl for a fire pit

Written by jennifer williams Google
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to use a ceramic bowl for a fire pit
Ceramic bowl fire pit (fire image by Dimitar Ivanov from Fotolia.com)

Using a ceramic bowl for a fire pit is a cost effective and versatile do-it-yourself project. Almost any ceramic bowl is usable as a fire pit as long as the bowl is entirely glazed and thus cannot absorb any moisture. Ceramic fire pit bowls have many advantages: they come in many sizes, shapes and colours, they are clean burning, have no odour smoke or fumes, no vent is needed and they can go indoors or outdoors.

Skill level:
Easy

Other People Are Reading

Things you need

  • Steel sheet
  • Metal clippers
  • Builder's sand
  • Ethanol gel fuel
  • Lava rock/glass fire rock
  • Long handled lighter

Show MoreHide

Instructions

  1. 1

    Select a ceramic bowl that is completely glazed so that it is impervious to moisture.

  2. 2

    Cut a piece of steel sheeting with metal clippers large enough to fit in the bottom of the bowl.

  3. 3

    Cover the piece of steel sheeting with a 3-inch layer of builder's sand.

  4. 4

    Set one, two or three canisters---depending on the size of the bowl---of ethanol gel fuel on top of the sand.

  5. 5

    Fill in the bowl around the canisters of ethanol gel fuel with lava rock, either crushed or whole. If using fire glass, use the fire glass to fill in the last 2 inches up to the level of the top of the ethanol gel fuel canisters, without covering the tops of the canisters. If not using fire glass, fill in the entire area inside the bowl around the gel fuel canisters with the lava rock until it is level with the top of the fuel canisters, without covering the top of the canisters.

  6. 6

    Open the ethanol gel fuel canisters by removing the tops and light them by barely touching the flame of a long handled lighter to the top of the gel inside each canister.

Tips and warnings

  • Choose the size of the ceramic fire bowl based on where it is likely to sit. Usually the larger the bowl is the more dramatic the visual effect is when using it as part of a fire pit.
  • Decide on the number of ethanol gel fuel canisters to use based on how many the bowl accommodates and how many it takes to create a full-looking flame.
  • Select a bowl that is completely glazed, even on the bottom and inside, otherwise any moisture absorbed by the clay of the bowl will boil when exposed to the prolonged heat, ultimately cracking and splitting the clay.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.