How to Open PetSafe RFA-67 and Put In Batteries

Written by nick davis
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Open PetSafe RFA-67 and Put In Batteries
It's easy to replace the battery in your PetSafe collar. (dog image by astoria from Fotolia.com)

Totally invisible and safe, the PetSafe Wireless Pet Containment System and the RFA-67 collar keep your pet within the boundaries of an electronic fence. The RFA-67 collar, also known as the "Receiver Collar," contains a battery in its front. No special tool is required to open the collar and change the battery, but you must remove the collar from your pet first.

Skill level:
Easy

Other People Are Reading

Things you need

  • Soft cloth or rag
  • Quarter
  • RFA-67 battery

Show MoreHide

Instructions

  1. 1

    Remove the PetSafe collar from your pet by squeezing the two plastic clips on the side of the collar inward.

  2. 2

    Wipe the front of the collar with a soft cloth or rag. This will remove any debris from around the battery housing.

  3. 3

    Insert a quarter into the slot on the front of the battery housing.

  4. 4

    Turn the battery housing counter-clockwise to remove it. Place the old battery housing to the side.

  5. 5

    Insert the new RFA-67 battery housing into the PetSafe collar.

  6. 6

    Insert a quarter into the slot on the front of the battery housing. Turn it clockwise until the arrow on the battery housing and the triangle on the collar line up. The battery housing is now locked into place.

Tips and warnings

  • Dispose of the old battery housing properly, at a recycling centre or other battery drop-off location.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.