How to refinish paint chipping from a bath tub

Written by lisa east hunter
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to refinish paint chipping from a bath tub
(Jupiterimages/Photos.com/Getty Images)

Paint chips in a tub will reveal the cast iron beneath and will be an eyesore in your bathroom. You have two options for refinishing paint chips in a tub: Patch the paint by touching it up, or refinish the entire tub. If you are dealing with a large chip or multiple chips, it might be time to refinish the entire tub. For best results, contact a professional tub refinishing contractor. However, a small chip can be fixed without paying a pro.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Utility knife
  • Rag
  • Acetone
  • Repair kit containing repair paste, toner, buffing solution
  • Putty knife
  • Sandpaper

Show MoreHide

Instructions

  1. 1

    Prepare the chip by removing the enamel all the way down to the surface. Use a sharp blade, like a utility knife, to cut a V shape around the chip. Cut the spot with the knife until you get all of the enamel off of the tub in a triangle shape. Wipe away the dust.

  2. 2

    Use a clean rag dipped in acetone to clean the surface of the chip. This will remove any remaining particles from the surface of the tub

  3. 3

    Mix the repair paste. Repair kits are available for most tubs in a range of colours. You can order a repair kit through the manufacturer or online. Choose the colour that best matches your tub’s finish. Mix the paste according to the directions that came with your kit to form a putty.

  4. 4

    Match the colour of your tub. Use the kit’s included toner to add white or black to your paste until you have matched the colour of your bathtub surface. Mix the toner and paste thoroughly.

  5. 5

    Use a putty knife to apply the paste over the chip. Overfill the chip slightly. Allow the paste to harden for one to two hours.

  6. 6

    Sand the repaired area to smooth out the surface. Start with 220-grit sandpaper. Change to 320-grit sandpaper, and sand the area again. Repeat with 400-grit and then 600-grit paper.

  7. 7

    Apply the buffing compound to a soft cloth, and rub the area to buff until the surface matches the rest of the tub.

Don't Miss

References

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.