How to reset the abs sensor on a camry

Written by alibaster smith
  • Share
  • Tweet
  • Share
  • Email

The anti-lock braking system (ABS) on your Toyota Camry is responsible for electronically pumping the brakes during hard-braking situations where, otherwise, the wheels would lock up and cause the car to skid. The ABS system can pump the brakes for you much faster than you could pump them yourself which will allow you to brake effectively but still retain control over your vehicle. The ABS system rarely malfunctions, but when it does you need to have it serviced right away. Sometimes, the fix to a malfunctioning ABS sensor is simply to reset the sensor.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Socket wrench
  • Socket set

Show MoreHide


  1. 1

    Open the bonnet of your Toyota and loosen the retaining nut on the cable clamp running to the negative battery terminal using a socket wrench.

  2. 2

    Slide the cable clamp off the terminal.

  3. 3

    Wait three full seconds before sliding the clamp back over the negative battery terminal.

  4. 4

    Tighten the retaining nut using a socket wrench.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.