How to use a picture-hanging kit

Written by emma lee
  • Share
  • Tweet
  • Share
  • Email

Picture-hanging kits contain screw eyes, wire, sawtooth backs and wall hooks. When purchasing a hanging kit, it is very important to know the weight of the picture. Kits will be labelled according to the weight they can support. Kits will also give the approximate number of pictures that can be hung using the kit. Purchasing a picture-hanging kit takes the guesswork out of hanging a picture. Hanging instructions and hardware are supplied in one package.

Skill level:

Things you need

  • Measure tape
  • Drill
  • Wire cutter
  • Hammer
  • Nail
  • Wood

Show MoreHide


  1. 1

    Measure and mark a spot on both sides of the picture frame to set the screws. Set the screws one third of the measurement from the top of the frame.

  2. 2

    Drill a starter hole if the frame is wood, then insert a screw eye into the hole. A screw eye is a screw with a loop at the end to attach the picture-hanging wire. Metal frames will have an attachment already in place.

  3. 3

    Measure the distance between the two screws. Use a wire cutter and cut the wire to a length that is 1½ times the distance between the screws. This step is the same for wood or metal frames.

  4. 4

    Loop one end of the wire through one screw eye with one inch of wire left over. Bend the wire and wrap it around the wire on the opposite side of the screw.

  5. 5

    Push the loose end of the wire through the second screw eye. Adjust the length of the wire by moving the wire to the top of the frame and positioning the wire in the middle of the frame. This point of the wire is where it will attach to the wall hook.

  6. 6

    Bend the remaining wire that is on the second screw backward. Wrap the leftover wire around the wire behind the screw. The wire is now secured on both screw eyes.

  7. 7

    Wrap tape around the ends of the wire to protect the wall from the points of the wire.

  8. 8

    Make a simple wood tool to find the proper hanging spot on the wall. Hammer a nail through a piece of narrow wood about 6 inches long. Face the nail away from the picture and hook the wire over the nail. Lift the picture to the wall using the piece of wood. Press the nail into the wall once you have chosen the right location for the picture to hang. The nail will make an indentation in the wall. Use this spot to hang the picture.

  9. 9

    Use two nails to hang long or heavy pictures. Place the hooks about 1 inch apart on the wall. Two hooks will add support and make adjusting the picture easier. Nail into a stud whenever possible.

  10. 10

    Hang the picture on the wall and make any necessary adjustments.

Tips and warnings

  • A sawtooth back is used for lightweight pictures and is centred at the top of the frame. It does not require a wire.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.