How to reseal stamped concrete

Written by marlene affeld
  • Share
  • Tweet
  • Share
  • Email

Stamped concrete is concrete stamped with an impression or design when the concrete was freshly poured and still wet. Most concrete is very bland and visually uninteresting. Architects, home builders and landscape contractors often stamp, apply colour and seal the concrete to add curb appeal, texture and durability to the concrete surface. Over time, exposure to foot traffic and weather can break down the sealant, which you may need to replace. Following simple instructions, it's quite easy to reseal the concrete and restore the surface.

Skill level:

Other People Are Reading

Things you need

  • Broom
  • Degreaser
  • Soft brush
  • Garden hose with pressure nozzle
  • Concrete sealer
  • Concrete colour
  • Premixed concrete repair material
  • Gloves
  • Eye protection
  • Dust mask
  • Concrete trowel
  • Concrete release powder
  • Concrete hardener

Show MoreHide


  1. 1

    Evaluate the area you need to seal. Do you have just a few spots where the sealer is coming off, or does the entire project (driveway, sidewalk, patio or retaining wall) need resealing?

  2. 2

    Sweep the concrete to remove loose dust and soil. Clean the concrete to remove grime, grease or oil stains. Use a biodegradable soap formulated to remove grease. (Scrub lightly with a soft brush or push broom.) Use a garden hose with a pressure nozzle on a low setting to rinse the concrete. Allow it to dry for 24 to 48 hours.

  3. 3

    Purchase sealer and colour agents from a concrete contractor or building supply store. Many manufacturers of acrylic coatings or sealers recommend resealing with the product that was applied originally. This eliminates concerns of weakened bond strength or incompatibility between the new and old sealer. If it's not possible to match the sealer originally used, consult a concrete professional for advice in choosing a compatible product. Always read and follow the manufacturer's application instructions.

  4. 4

    Repair concrete if required. Premixed concrete patching material is available from building supply outlets or concrete contractors. Apply with a concrete trowel to fill in holes or chips. Restamp, if required, after applying concrete release powder according to the package's instructions. (In small areas, use the tip of the trowel to carve the concrete to match the adjoining stamped concrete.) Wear protective gloves, goggles and a dust mask.

  5. 5

    Add coloured concrete hardeners following the labels' instructions. Allow it to dry for 24 hours. Add additional colour agents if required. You can remove excess colour with a gentle spray of water, or wipe with a wet rag. Allow it to dry for 24 hours prior to applying sealer.

  6. 6

    Apply a high-quality sealer following the manufacturer's package instructions. Apply two or more coats to any concrete that's exposed to heavy traffic or exposed to freezing and thawing.

Tips and warnings

  • Apply sealer when you can expect several days of dry, sunny weather. You want the sealer to have an opportunity to totally dry before exposing it to water.
  • Apply the sealer on a day when the wind isn't blowing strongly to avoid dust or debris settling into and attaching to the sealer.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.