How to take pictures through a display case glass without glare

Written by mackenzie wright
  • Share
  • Tweet
  • Share
  • Email

You would think that taking pictures through glass would be easy since glass is clear. The truth is that glass can be a tricky obstacle between you and your subject. You may come home dismayed to find that instead of the image you had hoped to capture, the result is a bright starburst of light blocking the subject and ruining the picture. Glass glare is the result of the reflection of your flash or bright existing lights bouncing off a glass that separates you from your subject. When you're trying to take photos at events, museums, aquariums, or any exhibits and displays that are encased in glass, keep glass glare and a few photography tips in mind as you compose your shot.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Camera
  • Adjustable flash
  • Glass cleaner
  • Paper towels
  • Rotating polarising filter
  • Photo editing software (optional)

Show MoreHide


  1. 1

    Turn off the flash if possible. Some display cases are illuminated well enough from the inside. If the existing light is good enough, you can eliminate the flash altogether and avoid glare bouncing off the glass. This will give you the greatest variety of angles to work with when snapping your photographs.

  2. 2

    Move or turn off any lights behind you that may be reflected in the glass. If you are unable to control the existing light, simply move your body or your camera so that they are not positioned directly behind.

  3. 3

    Angle the camera when you take your shot. A camera held at a 45 degree angle to the glass will reduce or eliminate any glare from a flash. If you have an adjustable flash, angle it to 45 degrees so that the light will not bounce directly off the glass and back at the camera. Instead, the light will bounce off the glass and away from the camera. You can angle from the left or right, or from above or below the subject. Take photos at multiple angles to increase your odds of a good shot.

  4. 4

    Move closer to the glass. If possible, put the lens up against the glass or zoom in closely on your subject. Be sure the glass is clean, both inside and outside, otherwise you may magnify smudges, lint or dirt streaks. Clean the glass on both sides, if you are able, before taking the photo.

  5. 5

    Attach a rotating polarising filter to your lens. These filters can help reduce glass glare and reflections. Not all cameras are equipped for using filters, but if yours is, experiment with a polariser.

  6. 6

    Experiment with these methods. If glass glare is unavoidable, try to make it as small as possible and manoeuvre the camera so that the glare is in an unobtrusive spot on the photo. Try to edit it out later with photo editing software.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.