How to Troubleshoot Honda SRS Problems

Written by alibaster smith
  • Share
  • Tweet
  • Share
  • Email

The SRS system in a Honda is a "supplemental restraint system." The SRS monitors the seat belt tension for airbag deployment. When there is a problem with your SRS system, the airbag in your Honda may not deploy. An electric circuit in the seat belt buckle may malfunction in your Honda. This is the most common cause of SRS malfunction for Hondas. But before fixing anything, troubleshoot the problem.

Skill level:
Moderately Easy

Other People Are Reading

Instructions

  1. 1

    Turn the ignition key to the "II" position and verify that the SRS light comes on.

  2. 2

    Open the fuse box underneath the steering column. Turn the lock handle counterclockwise and pull down on the fuse panel cover.

  3. 3

    Remove the SRS fuse with the fuse pullers in the fuse box.

  4. 4

    Check the metal strap inside the fuse to make sure that the fuse is not burnt or broken. If it is, replace the fuse with a fuse of the same amperage.

  5. 5

    Have a Honda dealership run a systems diagnostic check on your vehicle. There is a known SRS problem on some Honda vehicles that will cause the SRS system to malfunction. There is no recall on this defect, but the problem is covered by Honda's extended warranty, if you have one.

Tips and warnings

  • For specific information about your Honda SRS system, consult the particular vehicle's manual (see Resources).

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.