How to Install a Drawer Lock

Written by mason howard | 13/05/2017

If you have a drawer where you keep personal and private possessions like your diary, you may want to put a lock on the drawer to keep out others. Installing a pad lock can be unattractive and damaging to your cabinet or dressers; cylinder locks, however, are small, easy to attach and have a nicely finished look when installed in your drawer. Measure the width of your drawer to purchase the correct size of cylinder lock.

Remove the contents of your drawer, and remove the drawer from the cabinet or dresser.

Measure and mark the centre of your drawer along the top edge. Mark where the centre point of the lock will be. Make sure your measurement is in a place where the lock bolt will be able to extend beyond the top edge of the drawer and catch the upper edge on the surrounding facing of the cabinet or dresser.

Drill a hole that matches the circumference of the shaft of the lock using an expanding drill bit or a keyhole saw.

Sand the interior edges of the hole with sandpaper.

Remove the lock bolt and O-ring from the back of the lock shaft.

Insert the lock into the hole from the front. Position the key slot in a vertical position.

Replace the O-ring. Hold the front of the lock and press the O-ring against the backside of the drawer. Screw in the setting screws through the holes in O-ring to secure the lock.

Replace the lock bolt.

Things you need

  • Cylinder drawer lock
  • Drill with expanding bit or key hole saw
  • Screwdriver
  • Sandpaper
  • Measuring tape

Show MoreHide

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.