Installing metal railings on your brick steps is not only economical, but brings a kind of classic charm to your home. One of the advantages of a metal railing is that they come as one piece, the railing moulded to the support posts so they are easy to work with. Attaching them to your brick steps is a simple process. You may need to borrow a hammer drill to get it done, but you probably already have most of the tools you'll need.
- Skill level:
Things you need
- Permanent marker
- Hammer drill
- Concrete drill bit
- Concrete lag bolts
- Box wrench
Stand your metal railing in position on the steps. The railing will stand by itself as the support posts and anchor base is moulded as a part of the whole, that said, use caution as it will fall over easily.
Mark where the bolt holes in the base are on your brick steps using a permanent marker.
Remove the railing. Drill the bolt holes using a hammer drill and concrete bit to the depth needed for your lag bolts. Find the depth needed by either looking on the package that the bolts came in or measuring the threaded sleeve on the bolt.
Remove the threaded sleeves from the lag bolts. Using a hammer, gently tap the sleeve into the holes you drilled until the top of the sleeve is flush with the surface of the step.
Stand the railing again. Insert one bolt in each of the anchor bases and start the bolt, just enough for them to grab the threads.
Insert and start all the bolts in each base. Tighten all the bolts down in stages, moving from bolt to bolt and base to base. This will prevent the railing from being pulled out of line. When you are done, repeat these steps to attach the other railing to the opposite side if needed.
Tips and warnings
- Mark out the bolt holes to be drilled on both sides at once, this way you will work more efficiently and get the job done faster as each step will not have to be repeated but will incorporate the whole job.
- Only use concrete lag bolts rated for the weight of your railing and expected supporting weight (how much weight the railing can hold should someone fall against it). Using a lag bolt that is too small could lead to a serious accident as the railing will fail should a person fall into it or need it for support.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for