How to make parrot nesting boxes

Written by emily mcnair
  • Share
  • Tweet
  • Share
  • Email

If you have breeding birds, you will quickly realise the need for parrot nest boxes. Nest boxes sometimes only last one season, and getting the appropriate size and specification for your species type can be challenging. If you are familiar with the needs of your breeding pairs, you can create your own boxes.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Untreated plywood
  • Electricdrill
  • Saw
  • Nails
  • Hammer

Show MoreHide


  1. 1

    Decide what size box is needed for your birds. Then, measure out four square sides on your plywood. Make sure to lay the plywood on a level surface to measure and mark, so that all the sides will be even.

  2. 2

    Cut four squares in your plywood with your saw, according to the marks you made in the previous step. You should now have four square pieces of plywood ready to assemble into a box shape.

  3. 3

    Drill a hole where the opening to the box should be. Then, using your saw complete the hole, make it an appropriate size so the birds can easily fit through. Make sure not to make the hole too close to the bottom of the box---midway up the middle is fine. You don't want to make it possible for any chicks to fall out of the nest.

  4. 4

    Drill two holes in the back of the box so that you can easily affix the box in the cage or aviary.

  5. 5

    Assemble the box after all pieces have been cut and appropriate holes have been drilled. Using your hammer and nails, build the box. Make sure you have the drilled opening as the front of the box. Hammer the nails as tightly as possible as to not entice the birds to chew them. Use stainless steel nails or nickel plated nails, to prevent any possible lead poisoning.

Tips and warnings

  • Modify the box to form a "boot" or an ":" shape if you have a species that is more skittish.
  • Make sure the box you are building is appropriate for your bird's size and species.
  • Use zip ties, screws, or other hardware to affix the box to the birds cage or aviary.
  • Be sure the box is tightly fitted and can handle the pressure and weight of a breeding pair plus possible clutch.
  • Fill the box with about 2 inches of bird safe nesting material for the parents to use. Use of too little nesting material can result in splay leg or other issues.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.