How to Change the Code on an Ademco Security System

Written by victore
  • Share
  • Tweet
  • Share
  • Email

The Honeywell Ademco is a reliable alarm system for homeowners. The system's master code is provided to the homewoner after the alarm is installed. This code will allow the owner to gain access to various options on the system. If you don't like the idea of the security company or installer knowing your code, you have the freedom to change it at any time. Changing the code is actually quite simple.

Skill level:

Other People Are Reading


  1. 1

    Input the master code for the system using the numbers located on the keypad. The master code for the system was provided to you when your alarm system was installed. If you don't have it, contact the company that installed your system and request it.

  2. 2

    Push down firmly on the "8" button. Now press "0" and then "2." The code button is "8" and utilised to provide various settings for the system. The numbers "0" and "2" are the codes which reset the master code.

  3. 3

    Input a new system code on the keypad twice. You have now changed the code on the Ademco security system.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.