A pickguard is a piece of plastic, typically at a thickness of about .095 inches, that adheres to the front of a guitar. It protects the area around the pickups and knobs and a good portion of the front of the guitar body from pick damage due to playing over an extended period of time. Pickguards come in a variety of shapes and colours and are fitted to the cover with openings for tuning and volume knobs, as well as the pickups. Some pickguards are fitted between elements. Many musicians prefer to design and make their own pickguards, which is a relatively simple process. Here's how you can cut a custom pickguard for your guitar.
- Skill level:
Other People Are Reading
Things you need
- Pickguard material
- Band saw or jig saw
- Utility knife
- Dry erase marker
- Tape measure
- Small screws (if desired)
Design your pickguard. Look at the front of your guitar and decide whether you want the pickguard to be fitted over your tuning and volume knobs or if you plan to make a small pickguard that will fit in the space between the knobs and pickups. Decide if you will need to cut holes for your pickup (if you choose to apply a large pickguard).
Purchase the material you'll need to cut your pickguard. You can purchase plastic material for pickguards from some music supply stores or find it online. The material comes in flat sheets and in a variety of colours. Decide how thick or thin you want your pickguard. For an electric, 0.95-inch is acceptable. Since hollow-body guitars are less durable than solid-body, consider thicker material for an acoustic guitar pickguard.
Measure the area you want your pickguard to cover, then measure the area for any holes you will need to cut for knobs and pickups. With a thin dry erase marker, draw your pickguard onto the plastic material, including all areas you will need to remove to allow access to knobs and pickups.
Place the plastic material on a flat, stable surface and cut your pickguard using a band saw or a portable jig saw. You can also cut a pickguard by hand using only a utility knife, but this takes a steady hand and isn't recommended.
Sand all of the edges of your finished pickguard with a piece of sandpaper, then seat the pickguard on your guitar. Most pickguard material is self-adhesive. You can add small screws on the main corners of your pickguard for extra assurance, but avoid using screws on an acoustic guitar.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for