A leather vest can be a great addition to any wardrobe. Whether you favour western wear or even just traditional clothing items of high quality, a leather vest will compliment many different styles and ensembles. Learn how to make a leather vest from a pattern that you create yourself. This is a project that may take some time, but the finished result will be a stylish looking vest that you are proud to wear.
Measure your chest at its widest point. Divide this measurement by two. Add 3 inches to this number. Measure your shoulder bone to the point you want the vest to come to. Add 1 1/2 inches to this measurement.
Cut a rectangle of paper to the dimensions figured in Step 1.
Measure from your shoulder bone to the point under your arm that you want the vest armhole to be. Add 5/8 inch to this measurement.
Fold the paper rectangle cut in step 2 in half, from side to side. Measure from the top of the paper the measurement figured in Step 3. Place a mark at this measurement near the edge of the paper that is opposite the folded edge. Draw an outline of the armhole by making a curved line from this mark to the top edge of the paper.
Determine the width for the shoulder of the vest and make a mark at the top edge of the paper at this point. Make another mark 2 inches from the top of the paper along the folded edge. Connect these two marks with a curved line to create the back neck edge. Cut the both layers of paper on these lines to create the back vest pattern.
Fold a second piece of paper in the same fashion as you did in Step 4 to make the front vest pattern. Place the two folded papers on top of each other with the back vest pattern on top.
Trace the armhole of the back vest pattern onto the front vest pattern paper. Make this armhole slightly larger than the back armhole curve to allow for easier arm movement. Draw the neck edge of the for the front vest pattern, except vary the front neck edge to be a straight line.
Cut the front vest pattern out of the paper along the lines drawn and down the centre fold to make the two front vest pattern pieces.
Lay the leather onto a flat work surface with the wrong side facing up. Fold the leather so that the uncut selvedge edges are lined up and the folded edge is nearest you. Position the pattern pieces so that the back piece is along the folded edge as shown in the diagram. The front edge should be placed along side the back edge. Pin the pieces to the leather and carefully cut them out.
Repeat Step 1 with the lining fabric.
Set the stitch width on your sewing machine to at least 5 and sew the vest back and the vest fronts together at the shoulders and sides with a 5/8-inch seam allowance. Stitch the lining vest back and fronts together in the same fashion.
Lay the leather vest out flat with the right side facing up. Place the lining on top of the vest with the wrong side facing up. Line the vest pieces up, matching edges and seams and pin to secure. Sew along the front edges, the necklines, the armholes and the bottom edge of the vest fronts. Do not sew the vest backs.
Turn the vest to the right side out. Along the lower back of the vest turn the raw edge in to make it even with the sewn portion of the bottom of the vest. Pin this edge to secure. Sew along the bottom back edge, and top stitch along the other edges of the vest to finish the leather vest.