Painting your golf club shaft can be a cool way to give your swing a signature twist. Most golf club shafts are made of graphite, a durable, lightweight metal that allows a club to be swung at high speeds without breaking. Some even more durable clubs shafts are made out of steel. Regardless of the type of metal, nearly all club shafts are coated in a special galvanised finish to protect them from the elements. Thus, properly painting a golf club shaft requires a specific technique or else the paint will easily chip off.
Lay out the newspaper so that it covers an area two feet larger than the area of the club shaft your are going to paint.
Rub down the club shaft with the sandpaper using a gentle, even stroke. This will remove most of the galvanised finish and provide a better surface for the paint to adhere to. Wipe down the club shaft with a cloth to remove any dust.
Cover the grip and the head of the club with the plastic wrap and secure the plastic with the painter's tape. Make sure that the plastic is covering any part of the club you do not want to be painted.
Paint the shaft in an acrylic or latex-based galvanised metal primer. Be careful not to over-paint the shaft. You only need a thin layer. Allow the primer to adequately dry.
Spray the metallic spray paint on the club shaft. Use a steady, even motion to apply the coat of paint evenly and rotate the shaft with the hand that is not applying the paint.
Lay the golf club on the two wooden blocks, placing one block under the grip and one under the club head, lying the club over the newspaper.
You can use two or more different colours to create a unique pattern or design.
Paint will not adhere as well if it is cold or humid in the area where the paint is being applied. Make sure that the spray paint you use is for metallic-based surfaces.
Tips and warnings
- You can use two or more different colours to create a unique pattern or design.
- Paint will not adhere as well if it is cold or humid in the area where the paint is being applied.
- Make sure that the spray paint you use is for metallic-based surfaces.
Things you need
- 100 grit sandpaper
- Metallic-based spray paint
- Metallic based acrylic or latex primer
- Plastic wrap
- Painter's tape