How to install insulation under a floor

Written by contributing writer
  • Share
  • Tweet
  • Share
  • Email

Buying insulation in rolls is the most economical to insulate your floors. When choosing installation, it is best to choose a type that is formaldehyde-free. It is not only earth friendly, but it will also benefit your health by not having toxic chemicals in your home environment.

Skill level:

Things you need

  • Dust mask
  • Measuring tape
  • Eye protection
  • Gloves
  • Staple gun with staples
  • Utility knife

Show MoreHide


  1. 1

    Put on your dust mask, gloves and eye protection.

  2. 2

    Measure the length of insulation you will need in the joist with your measuring tape.

  3. 3

    Cut your insulation to the appropriate measured length with your utility knife.

  4. 4

    Starting at one end, put up your insulation in between the joist. Put the flap of the kraft facing out over the wood on each side, and staple each side of the flap to the joist wood. Continue doing this all the way to the end of your length, staple every 3 inches on each side, or more if necessary to maintain proper hanging.

  5. 5

    Continue to follow Steps 2 to 4 on each joist that you need to insulate. If you come to wiring that is blocking your joist or plumbing, it is best to keep the wiring or plumbing outside of the insulation. If you can't do this due to the wire or plumbing being too tight to the joist, you could stop the insulation at the wire or pipe and continue on the other side of it and stuff some insulation above the wiring or pipe by hand.

Tips and warnings

  • Always wear eye safety goggles and breathing protection when handling fibreglass.
  • Make sure to cover all exposed parts of your body. Wear a long-sleeved shirt and gloves.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.