How to Change the Combination on a Kryptonite Combination Lock

Written by jeff wysaski
  • Share
  • Tweet
  • Share
  • Email

All Kryptonite resettable combination locks are designed so that you can change the combination as often as you'd like. These instructions are for resetting the combination on the Kryptonite Resettable Combination Cable. For other Kryptonite models, please see the Resources section below.

Skill level:

Other People Are Reading


  1. 1

    Open the lock. Align the numbers to match the current combination and pull the lock post out.

  2. 2

    Locate the reset buttons. There are two reset buttons on the combination portion of the lock. They are located next to the locking port (where the lock post is inserted).

  3. 3

    Push the reset buttons simultaneously. Use your thumb and index finger to turn the buttons counterclockwise until they won't go any further.

  4. 4

    Align the dials to your new desired combination.

  5. 5

    Remove the buttons from the reset position. Use your thumb and index finger to turn the two reset buttons clockwise until they return to their original positions.

  6. 6

    Double-check to make sure the new combination was recorded. Insert the lock post all the way and, without turning the dials, try to remove it again. If the lock post comes out, then the new combination was successfully recorded. If not, start over from Step 1.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.