How to make a poster frame

Written by aaron reynolds
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to make a poster frame
Match the frame style to the design of the poster.

A custom-built poster frame is an ideal way to compliment a unique poster that means something special to you. Sometimes store brand frames will not fit your poster or are to bland and boring. You can build your own frame with ease, as poster frames are easy to build and require only a couple types of equipment.

Skill level:
Easy

Other People Are Reading

Things you need

  • Wood
  • Mitre saw
  • Wood glue
  • Sanding paper
  • Glass (optional)
  • Finish (optional)

Show MoreHide

Instructions

  1. 1

    Pick the wood. There are hundreds of different kinds of woods available. Some are cheap and look all right, while more exotic woods come with a heftier price tag. Decide on a wood that will compliment your poster. Darker woods go well with black and white or other dark posters, while lighter woods compliment white and lighter coloured posters.

  2. 2

    Measure the poster. In order to build a custom frame for your poster, you must know the dimensions of the picture. Measure the height and width with a ruler. Jot the dimensions down on a notepad that you will not lose. Make sure you get the exact dimensions.

  3. 3

    Measure the wood. You need 2 matching pieces for the height and 2 matching pieces for the width. Use the dimensions recorded earlier and map them out on your wood. Use a pencil to clearly label where you need to cut.

  4. 4

    Cut the angles. You need a mitre saw to cut the angles. Mitre saws are ideal because they will set an exact 90 degree angle. After you have measured out the wood, you need to allow an additional couple of inches more for the angle, then proceed to cut your angles. The 2 long pieces of wood (the height), need to have opposite downward sloped angles for the top, and 2 upward sloped angles for the bottom. The shorter pieces (the width) need 1 upward and 1 downward sloped angle. If you cut the appropriate angles, all 4 pieces will line up to create a perfect square or rectangle.

  5. 5

    Glue the frame together. Grab some standard wood glue and connect 3 pieces together. This includes your top piece and 2 sides. Use 3 clamps on the 3 connecting angles and let set overnight. In the morning, remove the clamps and test the durability of the frame. If solid, you are ready to proceed.

  6. 6

    Get a piece of cardboard 1.5 mm (1/16 inch) shorter on all sides. This will serve as your backdrop. Place the poster on top of the cardboard. Slide the cardboard into the 3 connected pieces of wood. After the poster and cardboard is in place and straight, connect the fourth and final piece to the frame. Once again clamp and let set overnight. In the morning, make sure frame is durable and solid.

  7. 7

    Sand and finish. Use either a belt sander or standard piece of sanding paper. Take your time, running the sander on the outside surface and edges that will not face the wall. Keep sanding until the wood is very soft and smooth. You now have the option of putting a finish on the wood. Finishes provide a nice final touch to your frame. They can make the wood shine and provide an additional colour or texture. If you decide to add a finish, grab a brush and gently spread the finish on the wood. Make sure the finish goes on smooth and is not too thick.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.