Whether you're downsizing, upsizing, organising or just trying to find ways to make the most of your storage problems, a built-in wardrobe can cover a multitude of bases, offering space to keep everything from clothing to linens stowed neatly for quick retrieval. Assuming you have already figured out how much space you are willing to devote to your build-out, here is a general overview of how to lay out and frame up a closet that will make short work of your storage headaches. There are two types of wardrobe styles: the stand-alone and built-in types. These instructions cover the built-in style -- storage centres constructed from floor to ceiling installed against existing walls.
Draw up plans for your wardrobe or find blueprints on the Internet, at home improvement stores or at the library.
Locate electrical wiring sources in the wall before you start construction if you plan to install interior lighting in the wardrobe. Mark the area with tape or pencil.
Use a pencil or masking tape to mark the locations of the wardrobe's two sidewalls and wardrobe entry wall. Construction pros recommend making the wardrobe at least 70 cm (28 inches) deep to hold standard wardrobe items.
Construct side walls of 5 by 10 cm (2 by 4 inch) boards in either of two ways: (a) frame up the wardrobe's side walls on the floor, then raise them into position for anchoring to the wall or (b) build the side wall frames directly onto the wall. Use more 5 by 10 cm (2 by 4 inch) boards to close in the three walls.
Mark the centre of the wardrobe. To be certain everything is correctly lined up, hang a plumb bob from the ceiling marks to match up with parameter lines on the floor.
Nail 5 by 10 cm (2 by 4 inch) boards to existing flooring or subflooring and to the ceiling if the wardrobe is to have a finished interior.
Create a door frame on the front of the wardrobe using additional 5 by 10 cm (2 by 4 inch) boards.
Finish the interior of the wardrobe by tacking and taping precut sheets of plasterboard to the side and front walls and the ceiling. Cut out the section of plasterboard covering the electrical power source on the back wall. If a ceiling light is to be installed, cut a section from the ceiling plasterboard to bring the wiring into the closet.
Install a door. If you choose a sliding or bifold door(s), fasten tracks to the top and bottom of the opening before positioning the door(s) on the track. A standard prehung door will require hinges and hardware for installation.
Finish the exterior of the wardrobe with plasterboard or sand and finish the wood walls. Tape the seams before painting.
Determine the hanging mix of the items the wardrobe is slated to hold. Coats and dresses require more height than short garments like blouses, slacks, jackets and shirts. Install the main clothing rod by marking side walls, then attaching pole sockets to both sides. Insert the rod. Consider installing a centre bracket to prevent a long clothing pole from sagging.
Frame up interior shelving units if desired. Cut 5 by 10 cm (2 by 4 inch) boards into sections to create vertical braces. Add brackets at uniform intervals and slide precut shelves into the unit. If drawers are to be installed, nail frames into place before sliding drawers into the housing. Install the lighting fixture.
Things you need
- 5 by 10 cm (2 by 4 inch) timber
- Carpentry tools
- Screws and nails
- Closet fittings (pole and pole sockets)
- Ready-to-hang door or bifold/sliding doors with tracking