How to use a photocopier

Written by contributing writer
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to use a photocopier
Working the photocopier (photocopieuse 1 image by Nathalie P from Fotolia.com)

The photocopier is essential to the functioning of a modern business office. Today's photocopiers often perform multiple functions and almost rival the computer or telephone as a critical piece of office equipment. New photocopying technology has brought with it complicated control panels and mechanisms that can be confusing for the uninitiated office worker. However, the basic principles of photocopying have not changed much and the process of copying a simple document is manageable even for an office machine novice.

Skill level:
Easy

Other People Are Reading

Things you need

  • A working photocopier
  • Copier paper loaded in the photocopier
  • A document or other item to be copied

Show MoreHide

Instructions

  1. 1

    Turn on the photocopier. Locate the power switch, usually on the top of the photocopier on the control panel. Some photocopiers have a power switch on the side. Many photocopiers have a "sleep" mode that reduces power consumption while the copier is still on. Pressing the "Copy" button on the control panel will usually cause the copier to "wake up."

  2. 2

    Allow the photocopier to warm up. Most photocopiers require a couple of minutes to warm up. Older photocopiers typically take longer than newer models

  3. 3

    Place your document on the glass platen. Lift the cover of the photocopier; the platen is the glass surface underneath. Place your document face down on the glass. At the edges of the glass you'll see guide marks that indicate where to position your document. If the photocopier has a document feeder instead of a cover over the platen, do not lift the document feeder off the platen. Instead place your document(s) in the document feeder. Usually you will insert the document face up. Look at your document feeder. "Place document face up" or "Place document face down" will often be noted directly on the document feeder.

  4. 4

    Lower the photocopier cover onto the platen if you are not using a document feeder.

  5. 5

    Select the number of copies to be made. The control panel of the photocopier will have a display that shows the number of copies that will be produced. The photocopier may have a number key pad for selecting the number of copies, or it may have arrows, or a plus and minus sign, for changing the number incrementally.

  6. 6

    Select colour or black and white if the photocopier is a colour copier.

  7. 7

    Select the appropriate size paper on the control panel. Most photocopiers will have at least two paper trays, one with 8 1/2-inch by 11-inch paper, and the other with 8 1/2-inch by 14-inch paper. Most photocopiers also have a "paper bypass" feed that allows you to insert a single sheet of special-sized paper. If you need to make multiple copies on a special size or special colour paper, you'll need to place the special paper directly in one of the main paper trays.

  8. 8

    Reduce or enlarge the original image, if necessary. Many photocopiers have preset buttons for 50 per cent, 150 per cent or 200 per cent enlargements. You may need to set the reduction or enlargement percentage using a number key pad. Consult the photocopier user manual for specific instructions.

  9. 9

    Set other image editing features or functions on the photocopier, if necessary. Many photocopiers will produce two-sided copies, copy two original documents on one page, collate, punch holes or staple. Consult the photocopier user manual for specific instructions.

  10. 10

    Press the "Copy" button. The "Copy" button is usually the largest button on the control panel. It may also be labelled "Start." Often the button will be green, or have green markings. Your copies will be produced.

Tips and warnings

  • For photocopiers with document feeders, you can usually lift the document feeder and place a document directly on the platen, if necessary. The document feeder will not be activated during copying.
  • When using a photocopier that functions as document centre, always make sure you are not interrupting somebody else's copy job. Or, if you need to interrupt a copy job, get permission before doing so.
  • When performing basic user maintenance, like adding toner, notice that internal parts of the copier meant to be operated or manipulated by the user are brightly coloured, often florescent green or orange. Do not touch any internal parts of the copier without permission and training.
  • If paper or documents become jammed during photocopying, read the photocopier instruction manual before attempting to remove the jammed paper or document.
  • Never access the inner working mechanisms of the photocopier without permission from the photocopier owner, or your boss, if you are at work. Electricity or moving parts may injure you, or you may damage the machine.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.