How to make wrap pants

Written by kate lee
  • Share
  • Tweet
  • Share
  • Email

Wrap trousers are simple and stylish clothing that can be worn to yoga class, around the house, as flexible maternity wear, as a swimsuit cover-up, as part of a pirate or harem costume or even as everyday wear. They’re also known as Thai fisherman trousers or sarong trousers. They’re comfortable to wear, and easy to sew, since they’re one-size-fits-most and don’t require any elastic or zippers. You can make wrap trousers from any type of lightweight fabric, including cotton, polyester blends or rayon.

Skill level:
Easy

Other People Are Reading

Things you need

  • 2 yards of fabric
  • matching thread
  • 2 yards of 1/2 to 1 inch wide ribbon
  • scissors
  • measuring tape
  • straight pins
  • sewing machine
  • iron
  • ironing board
  • safety pin

Show MoreHide

Instructions

  1. 1

    Trim the lower edge of the fabric (the selvedge, or finished edge) so that the fabric is about 3 inches taller than the distance from your waist to your ankles.

  2. 2

    Cut the fabric in half to make two sections, each 1 yard wide.

  3. 3

    Place the pieces of fabric on top of each other, right sides together. Smooth out any wrinkles and pin the fabric together.

  4. 4

    Cut a u-shape in the centre of the top of the fabric, about 12 inches tall and 8 inches wide. This will be the crotch of the trousers. (You may need to make it a bit smaller or larger, depending on your size.)

  5. 5

    Stitch the fabric together along the u-shape. The fabric on one side of the u-shape will be the front of the trousers, and the fabric on the other side of the u-shape will be the back. (It doesn’t matter which is the front and which is the back.)

  6. 6

    Hem the bottom and side edges of the fabric by folding each raw edge over about 1/2 inch toward the wrong side. Press the fold flat, then fold it over about 1/2 inch again. Press the fold flat, then stitch along the fold.

  7. 7

    Fold the top edge of the front of the wrap trousers toward the wrong side about 2 inches. Press the fold, then pin it in place. Stitch the selvedge edge of the fold to the wrap trousers to make the casing for the drawstring.

  8. 8

    Repeat step 7 to make a casing on the back of the trousers.

  9. 9

    Cut the ribbon in half. Attach a safety pin to the end of one piece, and use the safety pin to pull the ribbon through the front casing. Pull the other piece of ribbon through the back casing. The wrap trousers are now ready to wear.

Tips and warnings

  • These trousers fit people up to about 5 feet, 8 inches tall. If you’re taller than that, you may need to buy extra fabric, or fabric that’s 60 inches wide rather than 44 inches wide.
  • Use caution when working with scissors, pins, irons and sewing machines.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.