If you don't have the money to buy every tool that you want, you can still make all the tools you own work harder for you. A good power drill is essential when you work a lot on various projects, and is necessary for both wood and metal projects. Make it do double duty. Make a drill disc sander from your power drill.
- Skill level:
Other People Are Reading
Things you need
- Cutting tool
- Hard rubber
- Extension bit
- Countersink bit
- Measuring tool
- Number 10 or 12 countersink screw
- Allen wrench
- Sanding disc
Cut a 1/4-inch thick piece of wood 3 inches in diameter to use as base for the block that you put the sandpaper on for the drill disc sander. The wood is the support for the extension. Cut a disc of thick heavy rubber 5 or 6 inches in diameter. You can get sanding discs in both sizes, so just choose what you prefer.
Purchase a 6-inch wood bit extension bit. You can find extension bits online at sites like Amazon or at your local hardware store.
Drill a 1/4-inch hole through the center of the wood circle and the rubber disc. Use a 5/8-inch countersink drill bit to create a valley to recess a number 10 or 12 screw head.
Apply pressure to the countersink head screw to push it into the open end hole on the wood bit extension. Use a the appropriate screwdriver to twist it further into the shaft.
Adjust the set screws on the wood extension bit with an Allen wrench until there's no give and the set screws grip the threads of the number 10 or 12 countersink screw. Make sure the head of the number 12 countersink set screw in recessed below the level of the rubber mat.
Use the adhesive on the back of the appropriately sized sanding disc to stick it on the rubber. Insert the shaft of the extension into the drill chuck and tighten down. You now have a drill disc sander.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for