Visonic Wireless Installation Help

Written by joy prescott
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Visonic Wireless Installation Help
Newer alarm systems can have sensors connected wirelessly to a control unit. (Brand X Pictures/Brand X Pictures/Getty Images)

Visonic manufactures two wireless property protection systems: PowerG and PowerMax. The PowerG system is a wireless intruder alarm. The PowerMax system provides whole house safeguards from intrusion, smoke, gas, carbon monoxide and floods.

Other People Are Reading

Preparation

The most important preparation step is a deployment plan for the system you are installing. Then, gather system components and mark in accordance with the plan. Next, connect temporary power to components needing programming and program as instructed in the manual.

Mounting

Typically, you first remove the front cover and then use the back cover to mark drilling points for the back cover on the mounting surface. Drill holes, insert wall anchors and then attach with screws. Finally, remove any cable knockouts and cable clamps.

Power Cable Routing

The manual includes wiring diagrams to properly wire the unit. Usually, plastic segments need to be removed and these are also indicated on a diagram. You can then insert the power cable, connect the power supply terminals and connect the telephone line cable.

Optional GSM Module Mounting

Some units have a global system for mobile (GSM) communications module that needs to be connected to the unit. The GSM module takes a SIM card, the same as a mobile phone.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.