Issues with the labelwriter 450 turbo

Written by william pullman
  • Share
  • Tweet
  • Share
  • Email

The DYMO LabelWriter 450 Turbo prints labels you create on your computer. Issues with the printer may occur on occasion, including problems with labels not coming out of the printer, labels sticking to the inside of the printer and poor print quality.

Labels Not Printing

Many of the issues users report with the LabelWriter 450 Turbo, including problems with the labels not coming out of the printer, are due to improperly inserted label rolls. To fix the label roll, open the top cover of the printer and remove the spindle. Slide the spool guide off the spindle, press the label roll so it sits flush against the spindle, reattach the spindle guide and press it firmly against the right side of the label roll, then reinsert the spindle.

Stuck Label

Labels stuck to parts inside the printer may cause printer jams. To remove a label stuck to the inside of the printer, open the top cover and remove the spindle. Slide the supplied cleaning card into the label feed area as if you were loading a roll of labels and press the Feed button on the front of the printer to pull the cleaning card through the printer, removing the stuck label in the process.

Print Quality

Poor print quality is often the result of a bad batch of labels or a dirty print head. Replace the current label roll with a new label roll and test the printout. If the quality is still poor, pass the cleaning card through the printer to clean the print head.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.